Device Insertion

By you or a caregiver

  1. Lie down on your back and open your legs so that you or your caregiver has access to your urethral opening.
  2. Clean the area around the urethral opening with a sterile alcohol wipe, by patting the area from above the urethral opening and then moving back towards the vagina.
  3. Open the sterile inFlow Device package (contains the inFlow + Introducer) and hold the Introducer without touching or dropping the inFlow Device to avoid contamination.
  4. Lubricate the external body of the inFlow Device with a medical lubricant that is recommended by your doctor.
  5. Insert the lubricated inFlow Device into the urethra until its outer tab touches the urethra opening (Figure A). The tab can be pointed up or down, depending on personal preference but is usually more comfortable pointing down, towards the vagina.
  6. Push the plunger on the Introducer (Figure B) until the device is released (Figure C).
  7. Dispose of the Introducer. It can go in the trash.
  8. Sit on the toilet and practice using the Activator one time. Check to see that you get a continuous flow of urine.
Figure A
Insert the device until its tab touches the urethral opening
Figure B
Push the plunger on the Introducer to deploy the device
Figure C
You are done. Replace the device in 29 days

Device Removal

Monthly, every 29 days

The inFlow can be easily and safely removed at any time. To remove the device, grasp it by its outside tab and pull it straight out. The device petals are soft and flexible and once you start pulling, they collapse so there’s no harm to delicate tissue.

Grasp the outside tab
Gently pull — the petals will collapse
Continuing pulling to remove the device

Other topics for inFlow users